Official partner of VertiDrive B.V. for Romania, Hungary, Albania, Serbia, Croatia, Libya, Tunisia, Pakistan

Contact

199 Republicii Street Ploiesti 100392, Romania +40 739 855 200 Mon-Fri, 9:00am-5:00pm sales@vertidrive.ro

Share

VERTIDRIVE M3 HYDRO-BLASTING

Removal of paint on steel surfaces, no matter in what direction

The Vertidrive M3 UHP water-jetting

The VertiDrive M3 Pipeblaster robot was designed for the removal of coatings and any type of dirt or marine growth on vertical steel pipes with a diameter of 500 mm and up (no limit). This includes the legs of oil rigs, bridges, mooring jetties, windmill towers, etc. It is remote-controlled for operator safety, comfort and productivity.

The unit can be equipped with a one-blast, two-blast or hydroblasting nozzle for coating removal. The reciprocating boom can be easily adjusted to suit the required pipe diameter. The boom will follow the pipe surface at an equal distance at all times. Depending on the size of the pipe, the unit will clean/blast up to 50% of the circumference in one stroke.

The nozzles can be adjusted to the most efficient angle and distance to the surface. Connected to two blast pots, an air flow of 20 cubic metres ensures the fastest blasting operation on the market. The unit adheres to the wall with permanent magnets in the drive assembly. The drive assembly can be adjusted to a suit a minimum pipe radius of 500 mm (no maximum). The lightweight construction and quick (dis)connect systems reduce the assembly time to approximately ten minutes.

Vertidrive M3 Hydro Blasting in a nutshell

Savings and safety go hand-in-hand

Ladders, aerial work platforms and scaffolding are no longer required with the application of our robot, as it can easily drive vertically, horizontally and even upside down against steel surfaces.

Multi-use

Easily change applications in just a few minutes, which allows you to change from Dry-blasting to Washing without wasting any time. Easy to use UHP water jetting, wet blasting, camera inspection, NDT, induction or any other desired application.

Proven capability

The longest running model with a worldwide track record. Series production for this model started as early as 2013, while development continued to give us the model we have today. Enthusiastic users deploy the robot across theworld for various jobs such as UHP Water Jetting, Washing, Dry Blasting, Wet Blasting and camera inspection, but the possibilities are still expanding.

NOW AVAILABLE

VERTIDRIVE M3
ATEX ZONE 2 VERSION

The use of our robots must always be safe, even in a dangerous environment with a possibility for an explosive atmosphere.
For this special demand, we have developed the certified ATEX zone 2 version, fully compliant and ready to go!

INTERCHANGEABLE APPLICATIONS

The Vertidrive M3 robot can be fitted with multiple applications

WASHING

For the removal of dirt, debris & rust on steel surfaces, in any direction

GRIT-BLASTING

For the removal of coatings on steel surfaces, in any direction

HYDRO BLASTING

For the removal of paint on steel surfaces, in any direction

600

EFFICIENCY

700

SPEED vs. MANUAL WORK

86

COST REDUCTION

VERTIDRIVE SERIES

M2 Handy

Vertical, horizontal & overhead blasting power

M3 Series

Magnetic power for washing & blasting

M4 Series

For closed hydroblast operations in all axes

M7 Series

Most compact and versatile, greatest holding force

M8 Series

The new state of the art cargo hold cleaning solution