VERTIDRIVE M3 GRIT-BLASTING
Removal of coatings on vertical, horizontal and overhead steel surfaces
The Vertidrive M3 Grit-blasting
The VertiDrive M3 Grit-blasting robot was designed for the removal of coatings on vertical, horizontal and overhead steel surfaces. This includes storage tanks, ship hulls and any other large steel structure. It is remotely controlled for operator safety, comfort and productivity.
The unit can be equipped with a one-blast, two-blast or three-blast nozzle. The nozzles can be adjusted to the most efficient angle and distance to the surface. Connected to three blast pots, an air flow of 40 cubic metres ensures the fastest blasting operation on the market. The blast nozzles are mounted on the reciprocating boom to ensure a clean and effective result in front of the robot of approximately 160 cm with each stroke. The unit adheres to the wall with permanent magnets in the drive assembly. The lightweight construction and quick (dis)connect systems reduce the assembly time to approximately ten minutes. Because the robot is controlled remotely, there is no need for crane assistance or cherry pickers.
Vertidrive M3 Grit Blasting in a nutshell
Savings and safety go hand-in-hand
Ladders, aerial work platforms and scaffolding are no longer required with the application of our robot, as it can easily drive vertically, horizontally and even upside down against steel surfaces.
Multi-use
Easily change applications in just a few minutes, which allows you to change from Dry-blasting to Washing without wasting any time. Easy to use UHP water jetting, wet blasting, camera inspection, NDT, induction or any other desired application.
Proven capability
The longest running model with a worldwide track record. Series production for this model started as early as 2013, while development continued to give us the model we have today. Enthusiastic users deploy the robot across theworld for various jobs such as UHP Water Jetting, Washing, Dry Blasting, Wet Blasting and camera inspection, but the possibilities are still expanding.
NOW AVAILABLE
VERTIDRIVE M3
ATEX ZONE 2 VERSION
The use of our robots must always be safe, even in a dangerous environment with a possibility for an explosive atmosphere.
For this special demand, we have developed the certified ATEX zone 2 version, fully compliant and ready to go!
INTERCHANGEABLE APPLICATIONS
The Vertidrive M3 robot can be fitted with multiple applications
EFFICIENCY
SPEED vs. MANUAL WORK
COST REDUCTION
VERTIDRIVE SERIES
M2 Handy
Vertical, horizontal & overhead blasting power
M3 Series
Magnetic power for washing & blasting
M4 Series
For closed hydroblast operations in all axes
M7 Series
Most compact and versatile, greatest holding force
M8 Series
The new state of the art cargo hold cleaning solution